Siemens

IWLAN antenna ANT793-8DP, 5 GHz.

IR-SMA male termination resistor, TI795-1R,2.4 and 5 GHz, IP65, 0...6 GHz.

ANT795-6MP Iwlan antenna with omnidirectional, 40 to 80 degree, 5/7 dBi, IP65/67.

Scalance router for the wireless IP communication from ethernet based programmable controllers via LTE.

SCALANCE, router for wireless connection, 8 interfaces, 5 pole, 24V, 8W, 0.33A.

Key Plug Sinema Rc Removable Data Storage.

SCALANCE X accessory, Plug in transceiver SFP991-1 with conformal coating.

SCALANCE, active plug-in transceiver, latched fastening method, range 5km, 100Mbit/s.

Active plug-in transceiver, single-mode glass up to max 26 km.

SCALANCE X accessory, media module MM991-2FM, 2x 100 Mbit/s BFOC ports.

Ruggedcom accesorio, Bi directional SFP, 1000BASE-BX-U, 1 x 1000Mbit/s.

Ruggedcom accesory, Bi direccional SFP, 1000BASE-BX-D, 1 x 1000Mbit/s.

RUGGEDCOM Accessory, SFP, 1 X 100MBIT/S,100BASE-FX, LC-Interface.

Media module for RSG2488, 4 x SFP-slot, supporting 100base-FX

RUGGEDCOM Accessory, SFP, 1 X 1000MBIT/S,1000BASE-LX, LC-Interface, Optical.

RUGGEDCOM RMC. industrially hardened fiber optical media converter specifically designed to operate in harsh environments rated at 24 VDC.

Ruggedcom RMC30NC 2 port serial to ethernet server, 56 bit encryption, rated at 18 to 36 VDC.

Ruggedcom RMC41, 2 port unmanaged ethernet switch that provides both copper to fiber media conversion, with 10 to 100Mbps . Rated at 88 to 300 VDC, 85 to 264 VAC, 2 DIN rail, 100FX multimode, 1300 nm, ST connector.

Power Supply 88-300VDC or 85-264VAC, screw terminal block.

RUGGEDCOM RX1500PN LM FX50 Line Module.

RUGGEDCOM RX1500PN LM 6TX01 Line Module.

RUGGEDCOM RSG2100NC, Ethernet switch, 56-bit, rated at 24 VDC.

Ruggedcom RS416 serial device server with integrated managed Ethernet switch.

Ruggedcom panels MX5000RE 12-port Ethernet module.

Ruggedcom conformally coated line module, RJ45.

A12+B05 RS900NC is a 9-port, industrially hardened, fully managed ethernet switch.

Ruggedcom RS900, 9-Port fully managed Ethernet switch.

Ethernet switch, 10 port, DIN rail mount, 10 to 60V DC.

Communication module, CMR2020, LOGO!

Communication module, 2 digital inputs, 2 digital outputs, ethernet connection to LOGO series, 12 to 24 V DC, 0.75 to 0.85 A.