Omron

Analog output module, panel mounting, rated at 4 to 20mA.

Module, 2 analog outputs, panel mount, rated at 10V.

Module, 4 outputs, rated from 4 to 20MA.

Module, 4 points, panel mounting, rated at 10V.

NX I/O Bus card.

Incremental Encoder Line driver Input, phases A and B: single-?phase 4 MHz.

Incremental Encoder PNP Inputs 2x, phases A and B single phase and rating of 500 kHz.

Ethercat Coupler, NX Series, rated at 4 Amp.

I/O Coupler module rated at 10AMP.

Ethercat bus coupler rated at 10A, 24V DC with an input and output of 63 units, 100Mbps.

SSI input module, NX series, 2 point.

Connector Module, 16 Digital Inputs, rated at 15 to 28.8V, 24 VDC, IP20.

24 VDC digital I/O unit

Digital inputs with standard speed rated at 24V DC.

PLC module to be used with Ethercat unit, with output current of 1A and supply voltage of 24VDC.

Controllers nx 2pt N.O. Relay output.

NX series digital I/O module, 8 Digital Outputs, normally-open relays, 2 A, 250 VAC, screwless push-in connector, 24 mm wide.

I/O Unit for use with CJ PLC, EtherCAT coupler unit, NX Series CPU unit.

Module with digital input, panel mount, rated at 24VDC and 400mA.

Module 8 point 12-24vdc

Transistor output module.

PLC expansion module, 16 outputs, 16 ports, 12 to 24V DC.

Standard speed, PNP 24 VDC, 0.5 A, 16 Digital Outputs.

Digital input unit, 32 PIN, rated at 24VDC.

Controllers NX IO Pwr.

NX I/O Bus module.

Power supply unit.

4 A output module.

NX I/O power feed unit, 5-24 V DC input, 10A, 12mm wide.

Controller, power feed 10A.