Beckhoff

EtherCAT Terminal, three phases, 120 mA, 500 V, compact terminal housing with signal LEDs.

EtherCAT Terminal, 2 Channel, 16 Bit, 24 V DC, 220 mA.

EtherCAT Terminal, 3-channel analog input, multi-function rated at 500 V AC/DC, 1 A, 16 bit.

EtherCAT Terminal, 2-channel analog output, 0 to 10 V, 12 bit.

EtherCAT Terminal, 4-channel analog output, rated at 4 to 20 mA, 12 bit.

EtherCat Terminal, 8 channel analog output, 12 bit, 4 to 20 mA.

EtherCAT terminal, 2 channel, 24V DC, 10V.

EtherCAT terminal, 4 channel analog output, 12 bit, 24 V DC.

Analog output terminal, ethercat terminal, 2 channel rated at 4 to 20 MA.

Ethercat terminal, 4 channel, ±10 V, 16 bit, 2-wire, single-ended with signal LEDs.

SSI encoder interface, 1 channel rated at 24 vdc.

EtherCAT Terminal, 2-channel encoder interface, 24 VDC.

EtherCAT Terminal, 1-channel encoder interface, incremental rated at 5 V DC, 5 MHz.

EtherCAT terminal, 2 channel, 24V DC.

EtherCAT Terminal contact, for connection of devices, 1-channel communication interface, 500 V, 120 mA, signal LEDs, DIN rail.

Serial interface with 2 channels that enable the connection with two RS232 interface devices , rated at 500V.

EtherCAT memory terminal, 130mA, IP20, 10A.

Link terminal point-to-point connection, 4-channel input terminal, 24 V DC, 16 connection points, 3-wire connection mode, 120 mA, 20M cable length.

Ethernet switch port,1-port communication interface, 10 to 100 Mbits, 500 V, 310 mA, LED siginal indicators.

4 ports RJ45 ethernet switch.

Ethercat terminal, 2 port communication interface, profinet RT, controller, 1 kbyte input/1 kbyte output data, 500 V, -25 to 85 degrees C.

EtherCAT bridge terminal, 24 V, 120 MA, 16 bit, 100m cable length, compact terminal housing with signal LEDs.

EtherCAT terminal, 100M cable length, LED signal indicators, 500 V, 400 mA, 100 Mbit/s E-bus 2x input 2x output.

Profibus master terminal wit 1 channel 9.6 KBAUD, 12 MBAUD, 9 pin.

Ethercat terminal, 1 channel, profibus slave terminal, 12 Mbit/s, status LEDs.

EtherCAT Terminal, PROFIBUS, 1 channel communication interface.

Canopen master terminal.

EtherCAT terminal communication interface, rated at 10 A, IP20.

EtherCAT Terminal, direct connection to Stepper Motor, Single Motion Interface, rated at 24 VDC and 1.5 Amp.

EtherCAT Terminal, 1 channel, rated at 48 V DC, 5 A.