Omron

Terminal Block

Link adapter, RS232C/RS-422.

Software To Down Load.

Software Package Ntst Tool Bar

Software-System Disk Support Tool For Nt-Series

Nt Series Support Tool W/Manual And Software

Programmable terminal, rated at 254VDC, 5.2inch, IP65.

Operator interface, 6 keys, 2.4 inches screen, 2 lines, 5V DC

Lamp backlight.

NT620 series, replacement backlight, for NT series panel.

Analog input module with panel mounting.

Analog I/O, 2 Analog Inputs, 4 to 20 mA differential.

I/O unit, DIN Rail, screwless push-in connector, 4 to 20 mA, resolution 1:30000.

2 Analog Inputs, rated 10V differential, 12 mm.

Analog input module, 4 inputs with panel mounting.

I/O Module, 4 analg inputs, 4 to 20 MA.

Module, 4 points, push in connector, rated at 4 to 20mA.

Analog Module, push in connector, rated at 4 to 20mA.

Module, 8 inputs, rated at 4 to 20MA.

Analag with 8 inputs rated at 10 V, 10 S/CH, 12 MM wide.

Interface module with 1 port, serial RS-232C.

Interface module, screw push in terminal.

Analog output module, panel mounting, rated at 4 to 20mA.

Module, 2 analog outputs, panel mount, rated at 10V.

Module, 4 outputs, rated from 4 to 20MA.

Module, 4 points, panel mounting, rated at 10V.

NX I/O Bus card.

Incremental Encoder Line driver Input, phases A and B: single-?phase 4 MHz.

Incremental Encoder PNP Inputs 2x, phases A and B single phase and rating of 500 kHz.

Ethercat Coupler, NX Series, rated at 4 Amp.