Phoenix Contact

Module, analog output, 4 channel, rated at 24VDC.

I/O Bus Terminal Module 16 Input 16 Output 24Vdc

IBS 24DI/32 Interbus Modul Module.

NEF 1-10, interference filter, 10A, 240V AC, 50 to 60Hz, IP20.

UAK2-PE/S-X-230AC-ST. Protective plug w/surge.

PSM-SET-FSMA/4-HCS, Connector, IP20, metal.

DT-UFB-IB-RB0, surge protection device.

Surge protection device, ethernet, 48V DC, 1.5A.

CB TM2 1A SFB P, thermomagnetic device circuit breaker, 2 changeover contacts, 80V DC, 1A.

CB TM2 5A SFB P, thermomagnetic device circuit breaker, 2 pole, 80V DC, 1A.

Contact mounting base for use with series CB 1/6-2/4 PT-BE.

Plug Component 2 Position To Terminal Block

Surge Protector, 24 V dc, maximum voltage rating of 20kA, maximum surge current surge arrester.

Discontinued. Surge Suppressors VAL-MS 1000PV ST.

Connection cable, to connect the controller boards to the PC (RS-232-C), with length 3 m.

VAL-MS 120 ST, type 2 surge protection plug, 120 vac.

VAL-MS 230 IT ST Surge protection connector type 2 and 230 VAC .

VAL-MS 500 ST Surge protection connector type 2, 500 vac.

MCR-RTD/I-E/NC, Converter, 20-30V DC, 80mA.

MACX MCR-SL-CAC- 5-I, Current measuring transducer, 19.2V to 30V DC.

Connection terminal block rated at 253 VDC/AC, 50 HZ.

Communicational analogue interface, 4 to 20mA, 3 way, 50Hz.

Din Rail Terminal Blocks

Signal conditioner, isolating amplifier, rated at 24V.

Single conditioner, 1 channel, 300V AC, 10kHz, 9.6V DC to 30V DC, 700mW.

Current transducer, rated from 12 to 24VDC.

MCR-SL-S-200-I-LP. Mc current measuring transducer.

MCR passive current measuring transducer, for sinusoidal alternating currents.

Frequency transducer, analog signals, 3-way isolation, 20 to 30V DC, 60mA, 50HZ.

MCR-FL-C-UI-2UI-DCI, Signal multiplier conditioner rated at 2-30V DC 1.5kV and 50Hz.