Honeywell

Burner Control Automatic Primary 7800 Series

Burner control rated at 120 VAC, 50 to 60 HZ.

ICT relay module, on/off primary control, 120vac, shutter drive capability.

Relay module rated at 120V AC, 50-60HZ.

Controller Automatic Programming 120V

On/Off Primary Control Burner Control.

Burner Control

Relay module, burner control, 120V AC, 50/60Hz.

Burner control unit, 7800 series, 120V AC, 50/60 Hz, 10 second main flame establishing period, 10 or 4 second pilot flame establishing period.

Burner control relay module, rated at 120V, 50/60Hz.

Electronic device for heat cost allocation, from 2402 to 2480MHz, 3.7V, 1300mAh.

Fire alarm control panel, six zone, 120V AC, 7A.

Pneumatic Relay

Electronic pneumatic transducer, direct action with 2 to 10 vdc input signal.

Pneumatic Transducer 24Vac 50/60Hz

Pneumatic Transducer 24Vac 3Wire

Electronic pneumatic transducer, 24V AC, 1M cable.

Pneumatic transducer, 3 to 14.5 PSI, 24V AC, 50/60Hz.

Controller Temperature

Pneumatic Controller Proportional Direct Acting

Hall effect rotary position sensor, 10 to 30V AC, 25V DC.

Potentiometer rated 500 Ohm, 2W.

Conductive plastic potentiometer, 2W, panel mounting.

Relay Ac 600V/10A 4No/0Nc Coil 120V/60Hz 110V/50Hz

Measuring wire aisi 316 30m.

Displacer for servo gauge, 90mm.

IR Connector servo.

Specific transmitter level sensor.

Pcb gps gauge power supply.

Pcb hcu hart 1/2 and spot.