Turck Banner

IM21 series interface module, 1 channel, screw termination, relay output type, IP20.

Inductive linear position sensor, 50 mm range a to b, analogue output, m12 connector.

Magnetic mounting bracket.

Cordset, female, single ended, molex, 3-pin, IP50, 300V AC/DC.

7505501, 2 channel isolating switching amplifier, LED indicators, 24V DC, NC mode , short circuit mode, galvanic isolation.

Single channel rotational speed moitor operated at 24VDC.

Level Controller, 19 to 29V DC, output 250V AC/DC, IP20.

Isolating switching amplifier, dual channel,20-250vac / 20-125vdc input

Inductive Sensor, 40153.

Inductive sensor.

Proximity switch, inductive rated at 10-30vdc, 25mm and sensing.

Sensor inductive with 30MM, 10 to 55V DC.

Inductive sensor with increased switching distance, LEDs signal indicators, high switching frequency, 3 wire, M12 1 male connector, 30 VDC, resistant to magnetic fields.

Inductive Sensor for Rotary Encoder, 1650022, rated at 10 to 30VDC.

Inductive Sensor, 1650020, rated at 10 to 30 VDC, 3Nm, 15mA.

Inductive sensor rated at 35 to 250 VAC, 10 to 300 VDC, 3 to 100 MA with 4 MM.

Sensor, 40 mm range, 10 to 30V DC, 2 leds, 1/2 to 14 NPT mounting base.

Inductive sensor with extended switching distance, 4 wire, 10 to 30V DC.

Inductive sensor, 11mm diameter, 5mm sensing range, PNP.

Inductive Sensor, 0-50mm Detection, 65V, IP68.

Inductive sensor, 10-30V DC, 100bar, 2V, 55Hz.

Proximity sensor, 10 to 65 VDC, 200MA, 75mm switching distance.

Pressure transmitter, 33V DC, 100 PSI.

Receiver with output timer.

Molded cordset.

Molded cordset.

Cable U5301.

Cable.

Actuator and Sensor Cable, 6628421, Female M12, 2 Pin connector.

Cordset, single ended, 7/8 inch minifast, straight female connector, 5 wire, 18 awg and 4 meter length.